Update: Palm Fire in Fresno County now brought under 100% containment

The creation of this content included the use of AI based on templates created, reviewed and edited by journalists in the newsroom. Read more on our AI policy here.

Updated: 7:18 a.m. June 7

First discovered: 13 hours ago, 6:01 p.m. June 6

Initial location: Coalinga, Palmer Road and Derrick Bouelvard, Fresno County, Calif.

Fire unit: Cal Fire Fresno-Kings Unit

Fire type: Wildfire

Fire name: Palm Fire

Palm Fire initially started 6:01 p.m. June 6 at Coalinga, Palmer Road and Derrick Bouelvard in Fresno County, California.

It has burned 11 acres after being active for 13 hours. A fire crew of three managed to contain the blaze entirely by Sunday morning. The cause of it is still under investigation.

According to Cal Fire, "Numerous firefighting air tankers from throughout the State are flying fire suppression missions as conditions allow."

Fire containment

What does 100% containment mean?

Note that full containment doesn't mean the fire is completely out. In this case, it means that the whole perimeter of the wildfire has been surrounded by a control line and it is now stopped from spreading. A fully contained wildfire may continue to burn within the containment perimeter but is not likely to spread.

However, there's a significant difference between containing and controlling a wildfire. After the fire is fully contained, the next step is to control it. Controlling a fire means ensuring that the fire can't spread or cross the containment line.

Containment is part of a larger plan for managing a wildfire. It is normally expressed as a percentage and it refers to how much of the fire perimeter has been surrounded/enclosed by a control line that firefighters create. The containment percentage indicates a certain level of control, but it doesn't always correlate to safety level. Also, it's important to note that containment doesn't mean a fire is out.

How is containment measured?

The incident's central command constantly receives progress reports from firefighters on the ground. As the fireline is constructed, inspected or reinforced, mappers record those details to adjust the containment percentage. The percentage tells the public how much of the fire perimeter is believed to not go beyond the control lines.

Source: Cal Fire

United Robots Sacramento

This story was originally published June 7, 2026 at 6:35 AM.